主页 >> 产品 >> KT-N9913B
 
其它可用的配置。
请打电话找本公司经验丰富的销售人员。
 
Keysight Technologies (前 Agilent) N9913B
30kHz-4GHz FieldFox RF Analyzer
 
浏览
部件号包括的选项
选择需报价的项目
租用/租赁 买二手设备
KT-N9913B 
产品目录品名

Keysight Technologies (前 Agilent) N9913B

30kHz-4GHz FieldFox RF Analyzer
Features:
Cable and Antenna Analyzer (standard):
Frequency range: 30kHz to 4GHz
Distance-to-fault (dB), return loss, VSWR, dist-to-fault (VSWR), cable
Loss (1-port), insertion loss (2-port) , dist-to-fault (linear or Rho)
Display range: Start, stop, center, span
Return loss, log magnitude -1000 to 1000 dB
Log magnitude resolution 0.01 dB


Network Analyzer (option 210):
Frequency range: 30kHz to 26.5GHz
Transmission/reflection: (S21, S11), mag and phase, one-port
and enhanced response calibration with option 201
Full two-port (S21, S11, S12, S22) with option 211 requires 210
Time domain analysis with option 10, requires option 210 and recommend
211

System Dynamic range: 65dB IF bandwidth = 100Hz;
IF bandwidths 10Hz, 30Hz, 100Hz, 300Hz, 1kHz, 3kHz, 10kHz, 30kHz, 100kHz
Supports Keysight's ECAL modules

Spectrum Analyzer(option 233):
The following options require option 233:
209, 235, 236, 238, 312, 350, 351, 355, 356, 360, 370, 377, B04 and B10,
89601B

Frequency range: 100kHz to 26.5GHz usable to 5kHz
DANL (displayed average noise level):
-126dBm preamp off; -146dBm with preamp on (option 235)
Phase noise: -111dBc at 10kHz at 1GHz
TOI (third order inter-modulation distortion): +9.5dBm
Modulation BW: 25MHz standard
Resolution bandwidth (RBW)(-3 dB bandwidth): 10Hz to 5MHz
Non-zero span: 1, 1.5, 2, 3, 5, 7.5, 10 sequence

For tracking generator features, you need option 233 and 210.
QuickCal Enhanced response cal, and full 2-port cal (Option 112)

Real time Spectrum analysis with Option 350 requires option 233
Bandwidth: 10MHz standard, 40MHz with option B04 and 10MHz with option
B10
Option 370 Over-the-Air (OTA) LTE FDD requires options 233, 307 and recommends
options 235
Option 377 Over-the-Air (OTA) 5GTF requires options 233, 307, recommend option
235 and an external mixer
Option B04 or B10: require option 233, recommend option 350, 351 or 89601B
software


Extended Range Transmission Analysis (ERTA) Option 209
Requires options 233 and 210 Recommend 307.
ERTA is a scalar measurement system based on the use of two FieldFoxes.
One FieldFox acts as the source and reference receiver, while the
second FieldFox acts as the measurement receiver.
Vector voltmeter (VVM) (Option 308)
VVM: 30 kHz to 4 GHz, compare phase and electrical length
IF bandwidth - 10 Hz to 100 kHz
Output power - Low or high

External USB power sensor support (Option 302)
Requires U2000 Series USB average power sensors, and
allows the user to make absolute power measurements

Built-in GPS receiver (Option 307) may require an antenna
GPS receiver The internal GPS receiver can be used as a frequency reference
Modes Off, internal, external
Sync clock On, off
Functionality Geo-location:
Latitude, longitude, altitude, time, sync time/date
Connector for antenna SMA (f), 3.3 V


General information :
Battery life approx 3.5 hours
Test port connector Type N female 50ohm
Data storage:
Internal: Minimum 16MB Up to 1000 instrument states and trace
External: Supports USB 2.0 compatible memory devices;
Supports micro SD and micro SDHC memory cards
Interfaces:
Display 6.5 transfective color VGA-LED backlit
640 x 480 with antiglare coating
Mini USB (1 port) Hi-speed USB 2.0
USB-A (2 ports) Hi-speed USB 2.0
LAN 100Base-T External RJ45 connector
RF connector Type N female

Optional FieldFox accessories:
 KT-N9910X-870 Extra battery
 KT-N9910X-872 External battery charger
KT-N9910X-873 AC/DC adapter
 KT-N9910X-875 DC car charger and adapter
 KT-N9910X-880 Extra soft carrying case with backpack and shoulder strap
 KT-N9910X-881 Hard transit case

Recommended Calibration Kits:
Type N:
N9910X-800 DC-6GHz T-calibration kit,Type-N(m)
N9910X-801 DC-6GHz T-calibration kit,Type-N(f)
85514A DC-9GHz 4-in-1 OSLT mechanical calibration kit, Type-N (m), 50ohm
85515A DC-9GHz 4-in-1 OSLT mechanical calibration kit, Type-N (f), 50ohm
85518A DC-18GHz 4-in-1 OSLT mechanical calibration kit,Type-N (m), 50ohm
85519A DC-18GHz 4-in-1 OSLT mechanical calibration kit,Type-N (f), 50ohm
85054D DC-18GHz Economy calibration kit, Type-N, 50ohm
85032E DC-6GHz Economy calibration kit, Type-N, 50ohm
85032F DC-9GHz Standard calibration kit, Type-N, 50ohm
85054B DC-18GHz Standard calibration kit, Type-N, 50ohm
85054D DC-18GHz Economy calibration kit, Type-N, 50ohm
85036B DC-3GHz Standard calibration kit, Type-N, 75ohm
85036E DC-3GHz Economy calibration kit, Type-N, 75ohm
装运重量 
3.2 " 7.4 " 11.5 " 15 lb  
    
N/A 目前不出售的二手设备
需要配置方面的协助吗?请打电话找本公司经验丰富的销售人员。